 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
|
Xantrex C-Series Multi-Function Controllers
- Now featuring models at 35, 40, and 60 amps, these multi-controllers can be used for PV charge control, DC load
control, DC diversion. - They only operate in one mode, however, so PV charge control and DC load control requires two controllers.
- The 35- and 60-amp controllers can be manually selected for 12 or 24 volts.
- The 40-amp controller will do 12, 24, or 48 volts.
- Two-stage lightning and surge protection is included.
- The three-stage (bulk, absorb, float) PV charge control uses solid-state pulse width modulation control for the most
effective battery charging. - A battery temperature sensor is optional, and recommended if your batteries will see temperatures below 40°F or
above 90°F. - The DC load controller has adjustable disconnect and auto-reconnect voltages with a time delay for heavy surge
loads. - Electronic short-circuit protected. 9" x 5" x 2", weighs 4 lb.
- Certified by ETL to UL standards.
- Two-year mfr’s warranty. USA.
- RG-25-027Xantrex C-35 Multi Controller
- RG-25-017Xantrex C-40 Multi Controller
- RG-25-028Xantrex C-60 Multi Controller
- RG-25018Xantrex C-Series Optional LCD Display
- RG-25774Xantrex Remote C-Series LCD Display
- RG-27319Xantrex Battery Temperature Sensor
 | |  | |  | |  | |  | |  | |  | |  |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
